Configuration

This document explains how to use F5 NGINX Ingress Controller to configure NGINX App Protect WAF.

Note:
Check out the complete NGINX Ingress Controller with NGINX App Protect WAF example resources on GitHub for VirtualServer resources and for Ingress resources.

Global Configuration

NGINX Ingress Controller has global configuration parameters that match those in NGINX App Protect WAF. They are found in the ConfigMap resource: the NGINX App Protect WAF parameters are prefixed with app-protect*.

Enable NGINX App Protect WAF

NGINX App Protect WAF can be enabled and configured for custom resources (VirtualServer, VirtualServerRoute) or Ingress resources.

  • For custom resources, you need to create a Policy Custom Resource referencing the APPolicy custom resource or bundle, then add it to the VirtualServer definition. Additional detail can be found in the Policy Resource documentation.
  • For Ingress resources, apply the app-protect annotations to each desired resource.

NGINX App Protect WAF Policies

NGINX App Protect WAF Policies can be created for VirtualServer, VirtualServerRoute, or Ingress resources by creating an APPolicy custom resource. There are some caveats:

  • The fields policy.signature-requirements[].minRevisionDatetime and policy.signature-requirements[].maxRevisionDatetime are not supported.
  • The Advanced gRPC Protection for Unary Traffic only supports providing an idl-file inline. The fields policy.idl-files[].link, policy.idl-files[].$ref, and policy.idl-files[].file are not supported. The IDL file should be provided in field policy.idl-files[].contents. The value of this field can be base64 encoded. In this case the field policy.idl-files[].isBase64 should be set to true.
Warning:
External references are deprecated in NGINX Ingress Controller and will not be supported in future releases.

To add an NGINX App Protect WAF policy to an Ingress resource:

  1. Create an APPolicy custom resource manifest.
  2. Add the policy to the spec field in the APPolicy resource.

A resource specification and its Policy JSON must match. The fields must be identical in name and nesting level. If the resources are defined with YAML, the policy must also be represented in YAML.

As an example, this is a DataGuard policy:

{
    "policy": {
        "name": "dataguard_blocking",
        "template": { "name": "POLICY_TEMPLATE_NGINX_BASE" },
        "applicationLanguage": "utf-8",
        "enforcementMode": "blocking",
        "blocking-settings": {
            "violations": [
                {
                    "name": "VIOL_DATA_GUARD",
                    "alarm": true,
                    "block": true
                }
            ]
        },
        "data-guard": {
            "enabled": true,
            "maskData": true,
            "creditCardNumbers": true,
            "usSocialSecurityNumbers": true,
            "enforcementMode": "ignore-urls-in-list",
            "enforcementUrls": []
        }
    }
}

This is what its corresponding APPolicy resource defined in the spec would look like:

apiVersion: appprotect.f5.com/v1beta1
kind: APPolicy
metadata:
  name: dataguard-blocking
spec:
  policy:
    name: dataguard_blocking
    template:
      name: POLICY_TEMPLATE_NGINX_BASE
    applicationLanguage: utf-8
    enforcementMode: blocking
    blocking-settings:
      violations:
      - name: VIOL_DATA_GUARD
        alarm: true
        block: true
    data-guard:
      enabled: true
      maskData: true
      creditCardNumbers: true
      usSocialSecurityNumbers: true
      enforcementMode: ignore-urls-in-list
      enforcementUrls: []

Notice that the fields match in name and nesting: NGINX Ingress Controller will transform the YAML into a valid JSON WAF policy config.

NGINX App Protect WAF Logs

Configuring

You can set the NGINX App Protect WAF log configurations by creating an APLogConf Custom Resource.

To add the log configurations to a VirtualServer or an Ingress resource:

  1. Create an APLogConf Custom Resource manifest.
  2. Add the log configuration to the spec field in the APLogConf resource.
  3. Add a reference to APLogConf in the VirtualServer Policy resource or the Ingress resource as per the documentation.
Note:
The fields from the JSON must be presented in the YAML exactly the same, in name and level. NGINX Ingress Controller will transform the YAML into a valid JSON WAF log config.

For example, say you want to log state changing requests for your VirtualServer or Ingress resources using NGINX App Protect WAF. The log configuration looks like this:

{
    "filter": {
        "request_type": "all"
    },
    "content": {
        "format": "default",
        "max_request_size": "any",
        "max_message_size": "64k"
    }
}

You would define that config in the spec of your APLogConf resource as follows:

apiVersion: appprotect.f5.com/v1beta1
kind: APLogConf
metadata:
  name: logconf
spec:
  filter:
    request_type: all
  content:
    format: default
    max_request_size: any
    max_message_size: 64k

NGINX App Protect WAF User Defined Signatures

You can define NGINX App Protect WAF User-Defined Signatures for your VirtualServer or Ingress resources by creating an APUserSig Custom Resource.

Note:

The field revisionDatetime is not currently supported.

APUserSig resources increase the reload time of NGINX Plus compared with APPolicy and APLogConf resources. Read NGINX fails to start or reload for more information.

To add the User Defined Signatures to a VirtualServer or Ingress resource:

  1. Create an APUserSig Custom resource manifest.
  2. Add the desired User defined signature to the spec field in the APUserSig resource.
Note:

The fields from the JSON must be presented in the YAML exactly the same, in name and level.

NGINX Ingress Controller will transform the YAML into a valid JSON User-Defined signature. There is no need to reference the user defined signature resource in the Policy or Ingress resources.

For example, say you want to create the following user defined signature:

{  "softwareVersion": "15.1.0",
    "tag": "Fruits",
    "signatures": [
      {
      "name": "Apple_medium_acc",
      "rule": "content:\"apple\"; nocase;",
      "signatureType": "request",
      "attackType": {
         "name": "Brute Force Attack"
      },
      "systems": [
         {"name": "Microsoft Windows"},
         {"name": "Unix/Linux"}
                     ],
      "risk": "medium",
      "accuracy": "medium",
      "description": "Medium accuracy user defined signature with tag (Fruits)"
      }
   ]
}

You would add that config in the spec of your APUserSig resource as follows:

apiVersion: appprotect.f5.com/v1beta1
kind: APUserSig
metadata:
  name: apple
spec:
  signatures:
  - accuracy: medium
    attackType:
      name: Brute Force Attack
    description: Medium accuracy user defined signature with tag (Fruits)
    name: Apple_medium_acc
    risk: medium
    rule: content:"apple"; nocase;
    signatureType: request
    systems:
    - name: Microsoft Windows
    - name: Unix/Linux
  softwareVersion: 15.1.0
  tag: Fruits

NGINX App Protect WAF Bundles

You can define App Protect WAF bundles for VirtualServer custom resources by creating policy bundles and putting them on a mounted volume accessible from NGINX Ingress Controller.

Before applying a policy, a WAF policy bundle must be created, then copied to a volume mounted to /etc/nginx/waf/bundles.

Note:
NGINX Ingress Controller supports securityLogs for policy bundles when using apLogBundle instead of apLogConf. Log bundles must also be copied to a volume mounted to /etc/nginx/waf/bundles.

This example shows how a policy is configured by referencing a generated WAF Policy Bundle:

apiVersion: k8s.nginx.org/v1
kind: Policy
metadata:
  name: <policy_name>
spec:
  waf:
    enable: true
    apBundle: "<policy_bundle_name>.tgz"

This example shows the same policy as above but with a log bundle used for security log configuration:

apiVersion: k8s.nginx.org/v1
kind: Policy
metadata:
  name: <policy_name>
spec:
  waf:
    enable: true
    apBundle: "<policy_bundle_name>.tgz"
    securityLogs:
    - enable: true
      apLogBundle: "<log_bundle_name>.tgz"
      logDest: "syslog:server=syslog-svc.default:514"

OpenAPI Specification in NGINX Ingress Controller

The OpenAPI Specification defines the spec file format needed to describe RESTful APIs. The spec file can be written either in JSON or YAML. Using a spec file simplifies the work of implementing API protection. Refer to the OpenAPI Specification (formerly called Swagger) for details.

NGINX Ingress Controller supports OpenAPI Specification versions 2.0 and 3.0.

The simplest way to create an API protection policy is using an OpenAPI Specification file to import the details of the APIs. If you use an OpenAPI Specification file, NGINX App Protect WAF will automatically create a policy for the following properties (depending on what’s included in the spec file):

  • Methods
  • URLs
  • Parameters
  • JSON profiles

An OpenAPI-ready policy template is provided with the NGINX App Protect WAF packages and is located in: /etc/app_protect/conf/NginxApiSecurityPolicy.json

It contains violations related to OpenAPI set to blocking (enforced).

Types of OpenAPI References

There are different ways of referencing OpenAPI Specification files. The configuration is similar to External References.

Note: Any update of an OpenAPI Specification file referenced in the policy will not trigger a policy compilation. This action needs to be done actively by reloading the NGINX configuration.

URL Reference

URL reference is the method of referencing an external source by providing its full URL.

Make sure to configure certificates prior to using the HTTPS protocol - see the External References for details.

Configuration in NGINX Ingress Controller

These are the typical steps to deploy an OpenAPI protection Policy in NGINX Ingress Controller:

  1. Copy the API security policy /etc/app_protect/conf/NginxApiSecurityPolicy.json to a different file so that it can be edited.
  2. Add the reference to the desired OpenAPI file.
  3. Make other custom changes if needed (e.g. enable Data Guard protection).
  4. Use a tool to convert the result to YAML. There are many, for example: yq utility.
  5. Add the YAML properties to create an APPolicy Custom Resource putting the policy itself (as in step 4) within the spec property of the Custom Resource. Refer to the NGINX App Protect Policies section above.
  6. Create a Policy object which references the APPolicy Custom Resource as in this example.
  7. Finally, attach the Policy object to a VirtualServer resource as in this example.
Note:
You need to make sure that the server where the resource files are located is available while you are compiling your policy.

Example Configuration

In this example, we are adding an OpenAPI Specification file reference to /etc/app_protect/conf/NginxApiSecurityPolicy.yaml using the link. This will configure allowed data types for query_int and query_str parameters values.

Policy configuration:

---
apiVersion: appprotect.f5.com/v1beta1
  kind: APPolicy
  metadata:
    name: petstore_api_security_policy
  spec:
    policy:
      name: petstore_api_security_policy
      description: NGINX App Protect WAF API Security Policy for the Petstore API
      template:
        name: POLICY_TEMPLATE_NGINX_BASE
      open-api-files:
      - link: https://raw.githubusercontent.com/aws-samples/api-gateway-secure-pet-store/master/src/main/resources/swagger.yaml
      blocking-settings:
        violations:
        - block: true
          description: Disallowed file upload content detected in body
          name: VIOL_FILE_UPLOAD_IN_BODY
        - block: true
          description: Mandatory request body is missing
          name: VIOL_MANDATORY_REQUEST_BODY
        - block: true
          description: Illegal parameter location
          name: VIOL_PARAMETER_LOCATION
        - block: true
          description: Mandatory parameter is missing
          name: VIOL_MANDATORY_PARAMETER
        - block: true
          description: JSON data does not comply with JSON schema
          name: VIOL_JSON_SCHEMA
        - block: true
          description: Illegal parameter array value
          name: VIOL_PARAMETER_ARRAY_VALUE
        - block: true
          description: Illegal Base64 value
          name: VIOL_PARAMETER_VALUE_BASE64
        - block: true
          description: Disallowed file upload content detected
          name: VIOL_FILE_UPLOAD
        - block: true
          description: Illegal request content type
          name: VIOL_URL_CONTENT_TYPE
        - block: true
          description: Illegal static parameter value
          name: VIOL_PARAMETER_STATIC_VALUE
        - block: true
          description: Illegal parameter value length
          name: VIOL_PARAMETER_VALUE_LENGTH
        - block: true
          description: Illegal parameter data type
          name: VIOL_PARAMETER_DATA_TYPE
        - block: true
          description: Illegal parameter numeric value
          name: VIOL_PARAMETER_NUMERIC_VALUE
        - block: true
          description: Parameter value does not comply with regular expression
          name: VIOL_PARAMETER_VALUE_REGEXP
        - block: true
          description: Illegal URL
          name: VIOL_URL
        - block: true
          description: Illegal parameter
          name: VIOL_PARAMETER
        - block: true
          description: Illegal empty parameter value
          name: VIOL_PARAMETER_EMPTY_VALUE
        - block: true
          description: Illegal repeated parameter name
          name: VIOL_PARAMETER_REPEATED

Content of the referenced file myapi.yaml:

openapi: 3.0.1
info:
  title: 'Primitive data types'
  description: 'Primitive data types.'
  version: '2.5.0'
servers:
  - url: http://localhost
paths:
  /query:
    get:
      tags:
        - query_int_str
      description: query_int_str
      operationId: query_int_str
      parameters:
        - name: query_int
          in: query
          required: false
          allowEmptyValue: false
          schema:
            type: integer
        - name: query_str
          in: query
          required: false
          allowEmptyValue: true
          schema:
            type: string
      responses:
        200:
          description: OK
        404:
          description: NotFound

In this case, the following request will trigger an Illegal parameter data type violation, as we expect to have an integer value in the query_int parameter:

http://localhost/query?query_int=abc

The request will be blocked.

The link option is also available in the openApiFileReference property and is synonymous with the open-api-files property as seen in the policy example above.

Note: openApiFileReference is not an array.

Configuration in NGINX Plus Ingress Controller using Virtual Server Resource

In this example we deploy NGINX Ingress Controller with NGINX Plus and NGINX App Protect WAF, deploy a simple web application, and then configure load balancing and WAF protection for that application using the VirtualServer resource.

Note:
You can find the example, and the files referenced, on GitHub.

Prerequisites

  1. Follow the installation instructions to deploy NGINX Ingress Controller with NGINX Plus and NGINX App Protect WAF.

  2. Save the public IP address of NGINX Ingress Controller into a shell variable:

     IC_IP=XXX.YYY.ZZZ.III
    
  3. Save the HTTP port of NGINX Ingress Controller into a shell variable:

     IC_HTTP_PORT=<port number>
    

Step 1. Deploy a Web Application

Create the application deployment and service:

kubectl apply -f https://raw.githubusercontent.com/nginxinc/kubernetes-ingress/v4.0.0/examples/custom-resources/app-protect-waf/webapp.yaml

Step 2. Deploy the AP Policy

  1. Create the syslog service and pod for the NGINX App Protect WAF security logs:

    kubectl apply -f https://raw.githubusercontent.com/nginxinc/kubernetes-ingress/v4.0.0/examples/custom-resources/app-protect-waf/syslog.yaml
    
  2. Create the User-Defined Signature, WAF policy, and log configuration:

    kubectl apply -f https://raw.githubusercontent.com/nginxinc/kubernetes-ingress/v4.0.0/examples/custom-resources/app-protect-waf/ap-apple-uds.yaml
    kubectl apply -f https://raw.githubusercontent.com/nginxinc/kubernetes-ingress/v4.0.0/examples/custom-resources/app-protect-waf/ap-dataguard-alarm-policy.yaml
    kubectl apply -f https://raw.githubusercontent.com/nginxinc/kubernetes-ingress/v4.0.0/examples/custom-resources/app-protect-waf/ap-logconf.yaml
    

Step 3 - Deploy the WAF Policy

Create the WAF policy

 kubectl apply -f https://raw.githubusercontent.com/nginxinc/kubernetes-ingress/v4.0.0/examples/custom-resources/app-protect-waf/waf.yaml

Note the NGINX App Protect WAF configuration settings in the Policy resource. They enable WAF protection by configuring NGINX App Protect WAF with the policy and log configuration created in the previous step.

Step 4 - Configure Load Balancing

  1. Create the VirtualServer Resource:

    kubectl apply -f https://raw.githubusercontent.com/nginxinc/kubernetes-ingress/v4.0.0/examples/custom-resources/app-protect-waf/virtual-server.yaml
    

Note that the VirtualServer references the policy waf-policy created in Step 3.

Step 5 - Test the Application

To access the application, curl the coffee and the tea services. We’ll use the –resolve option to set the Host header of a request with webapp.example.com

  1. Send a request to the application:
curl --resolve webapp.example.com:$IC_HTTP_PORT:$IC_IP http://webapp.example.com:$IC_HTTP_PORT/
Server address: 10.12.0.18:80
Server name: webapp-7586895968-r26zn
  1. Now, let’s try to send a request with a suspicious URL:
curl --resolve webapp.example.com:$IC_HTTP_PORT:$IC_IP "http://webapp.example.com:$IC_HTTP_PORT/<script>"
<html><head><title>Request Rejected</title></head><body>
  1. Lastly, let’s try to send some suspicious data that matches the user defined signature.
curl --resolve webapp.example.com:$IC_HTTP_PORT:$IC_IP -X POST -d "apple" http://webapp.example.com:$IC_HTTP_PORT/
<html><head><title>Request Rejected</title></head><body>

As you can see, the suspicious requests were blocked by NGINX App Protect WAF.

  1. To check the security logs in the syslog pod:
kubectl exec -it <SYSLOG_POD> -- cat /var/log/messages

Configuration Example of Virtual Server

Refer to GitHub repo for Virtual Server example.

apiVersion: k8s.nginx.org/v1
kind: VirtualServer
metadata:
  name: webapp
spec:
  host: webapp.example.com
  policies:
  - name: waf-policy
  upstreams:
  - name: webapp
    service: webapp-svc
    port: 80
  routes:
  - path: /
    action:
      pass: webapp


Last modified October 2, 2024