Modify HTTP request and response headers

Learn how to modify the request and response headers of your application using NGINX Gateway Fabric.

Overview

HTTP Header Modifiers can be used to add, modify or remove headers during the request-response lifecycle. The RequestHeaderModifier is used to alter headers in a request sent by client and ResponseHeaderModifier is used to alter headers in a response to the client.

This guide describes how to configure the headers application to modify the headers in the request. Another version of the headers application is then used to modify response headers when client requests are made. For an introduction to exposing your application, we recommend that you follow the basic guide first.

Before you begin

Install NGINX Gateway Fabric.
Save the public IP address and port of NGINX Gateway Fabric into shell variables:
```
GW_IP=XXX.YYY.ZZZ.III
GW_PORT=<port number>
```

Note:
In a production environment, you should have a DNS record for the external IP address that is exposed, and it should refer to the hostname that the gateway will forward for .

HTTP Header Modifiers examples

We will configure a common gateway for the RequestHeaderModifier and ResponseHeaderModifier examples mentioned below.

Deploy the Gateway API resources for the Header application

The Gateway resource is typically deployed by the Cluster Operator. This Gateway defines a single listener on port 80. Since no hostname is specified, this listener matches on all hostnames. To deploy the Gateway:

kubectl apply -f - <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: Gateway
metadata:
  name: gateway
spec:
  gatewayClassName: nginx
  listeners:
  - name: http
    port: 80
    protocol: HTTP
EOF

RequestHeaderModifier example

This examples demonstrates how to configure traffic routing for a simple echo server. A HTTPRoute resource is used to route traffic to the headers application, using the RequestHeaderModifier filter to modify headers in the request. You can then verify that the server responds with the modified request headers.

Deploy the Headers application

Begin by deploying the example application headers. It is a simple application that returns the request headers which will be modified later.

kubectl apply -f https://raw.githubusercontent.com/nginxinc/nginx-gateway-fabric/v1.5.1/examples/http-request-header-filter/headers.yaml

This will create the headers Service and a Deployment with one Pod. Run the following command to verify the resources were created:

kubectl get pods,svc

pod/headers-545698447b-z52kj   1/1     Running   0          23s

NAME                 TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)   AGE
service/headers      ClusterIP   10.96.26.161   <none>        80/TCP    23s

Configure the HTTPRoute with RequestHeaderModifier filter

Create a HTTPRoute that exposes the header application outside the cluster using the listener created in the previous section. Use the following command:

kubectl apply -f - <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: headers
spec:
  parentRefs:
  - name: gateway
    sectionName: http
  hostnames:
  - "echo.example.com"
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /headers
    filters:
    - type: RequestHeaderModifier
      requestHeaderModifier:
        set:
        - name: My-Overwrite-Header
          value: this-is-the-only-value
        add:
        - name: Accept-Encoding
          value: compress
        - name: My-Cool-header
          value: this-is-an-appended-value
        remove:
        - User-Agent
    backendRefs:
    - name: headers
      port: 80
EOF

This HTTPRoute has a few important properties:

The parentRefs references the Gateway resource that we created, and specifically defines the http listener to attach to, via the sectionName field.
echo.example.com is the hostname that is matched for all requests to the backends defined in this HTTPRoute.
The match rule defines that all requests with the path prefix /headers are sent to the headers Service.
It has a RequestHeaderModifier filter defined for the path prefix /headers. This filter:
1. Sets the value for header My-Overwrite-Header to this-is-the-only-value.
2. Appends the value compress to the Accept-Encoding header and this-is-an-appended-value to the My-Cool-header.
3. Removes User-Agent header.

Send traffic to the Headers application

To access the application, use curl to send requests to the headers Service, which includes headers within the request.

curl -s --resolve echo.example.com:$GW_PORT:$GW_IP http://echo.example.com:$GW_PORT/headers -H "My-Cool-Header:my-client-value" -H "My-Overwrite-Header:dont-see-this"

  Headers:
  header 'Accept-Encoding' is 'compress'
  header 'My-Cool-header' is 'my-client-value,this-is-an-appended-value'
  header 'My-Overwrite-Header' is 'this-is-the-only-value'
  header 'Host' is 'echo.example.com:8080'
  header 'X-Forwarded-For' is '127.0.0.1'
  header 'Connection' is 'close'
  header 'X-Real-IP' is '127.0.0.1'
  header 'X-Forwarded-Proto' is 'http'
  header 'X-Forwarded-Host' is 'echo.example.com'
  header 'X-Forwarded-Port' is '80'
  header 'Accept' is '*/*'

In the output above, you can see that the headers application modifies the following custom headers:

User-Agent header is absent.
The header My-Cool-header gets appended with the new value my-client-value.
The header My-Overwrite-Header gets overwritten from dont-see-this to this-is-the-only-value.
The header Accept-encoding remains unchanged as we did not modify it in the curl request sent.

Delete the resources

Delete the headers application and HTTPRoute: another instance will be used for the next examples.

kubectl delete httproutes.gateway.networking.k8s.io headers

kubectl delete -f https://raw.githubusercontent.com/nginxinc/nginx-gateway-fabric/v1.5.1/examples/http-request-header-filter/headers.yaml

ResponseHeaderModifier example

Begin by configuring an application with custom headers and a simple HTTPRoute. The server response can be observed see its headers. The next step is to modify some of the headers using HTTPRoute filters to modify responses. Finally, verify the server responds with the modified headers.

Deploy the Headers application

Begin by deploying the example application headers. It is a simple application that adds response headers that will be modified later.

kubectl apply -f https://raw.githubusercontent.com/nginxinc/nginx-gateway-fabric/v1.5.1/examples/http-response-header-filter/headers.yaml

This will create the headers Service and a Deployment with one Pod. Run the following command to verify the resources were created:

kubectl get pods,svc

NAME                          READY   STATUS    RESTARTS   AGE
pod/headers-6f854c478-hd2jr   1/1     Running   0          95s

NAME                 TYPE        CLUSTER-IP    EXTERNAL-IP   PORT(S)   AGE
service/headers      ClusterIP   10.96.15.12   <none>        80/TCP    95s

Configure the basic HTTPRoute

Create a HTTPRoute that exposes the header application outside the cluster using the listener created in the previous section. You can do this with the following command:

kubectl apply -f - <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: headers
spec:
  parentRefs:
  - name: gateway
    sectionName: http
  hostnames:
  - "cafe.example.com"
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /headers
    backendRefs:
    - name: headers
      port: 80
EOF

This HTTPRoute has a few important properties:

The parentRefs references the Gateway resource that we created, and specifically defines the http listener to attach to, via the sectionName field.
cafe.example.com is the hostname that is matched for all requests to the backends defined in this HTTPRoute.
The match rule defines that all requests with the path prefix /headers are sent to the headers Service.

Send traffic to the Headers application

Use curl with the -i flag to access the application and include the response headers in the output:

curl -i --resolve cafe.example.com:$GW_PORT:$GW_IP http://cafe.example.com:$GW_PORT/headers

HTTP/1.1 200 OK
Server: nginx/1.25.5
Date: Mon, 06 May 2024 19:08:39 GMT
Content-Type: text/plain
Content-Length: 2
Connection: keep-alive
X-Header-Unmodified: unmodified
X-Header-Add: add-to
X-Header-Set: overwrite
X-Header-Remove: remove

ok

In the output above, you can see that the headers application adds the following custom headers to the response:

X-Header-Unmodified: unmodified
X-Header-Add: add-to
X-Header-Set: overwrite
X-Header-Remove: remove

The next section will modify these headers by adding a ResponseHeaderModifier filter to the headers HTTPRoute.

Update the HTTPRoute to modify the Response headers

Update the HTTPRoute by adding a ResponseHeaderModifier filter:

kubectl apply -f - <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: headers
spec:
  parentRefs:
  - name: gateway
    sectionName: http
  hostnames:
  - "cafe.example.com"
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /headers
    filters:
    - type: ResponseHeaderModifier
      responseHeaderModifier:
        set:
        - name: X-Header-Set
          value: overwritten-value
        add:
        - name: X-Header-Add
          value: this-is-the-appended-value
        remove:
        - X-Header-Remove
    backendRefs:
    - name: headers
      port: 80
EOF

Notice that this HTTPRoute has a ResponseHeaderModifier filter defined for the path prefix /headers. This filter:

Sets the value for the header X-Header-Set to overwritten-value.
Adds the value this-is-the-appended-value to the header X-Header-Add.
Removes X-Header-Remove header.

Send traffic to the modified Headers application

Send a curl request to the modified headers application to verify the response headers are modified.

curl -i --resolve cafe.example.com:$GW_PORT:$GW_IP http://cafe.example.com:$GW_PORT/headers

HTTP/1.1 200 OK
Server: nginx/1.25.5
Date: Mon, 06 May 2024 17:58:33 GMT
Content-Type: text/plain
Content-Length: 2
Connection: keep-alive
X-Header-Unmodified: unmodified
X-Header-Add: add-to
X-Header-Add: this-is-the-appended-value
X-Header-Set: overwritten-value

ok

In the output above you can notice the modified response headers as the X-Header-Unmodified remains unchanged as we did not include it in the filter and X-Header-Remove header is absent. The header X-Header-Add gets appended with the new value and X-Header-Set gets overwritten to overwritten-value as defined in the HttpRoute.

Modify HTTP request and response headers

Overview

Before you begin

HTTP Header Modifiers examples

Deploy the Gateway API resources for the Header application

RequestHeaderModifier example

Deploy the Headers application

Configure the HTTPRoute with RequestHeaderModifier filter

Send traffic to the Headers application

Delete the resources

ResponseHeaderModifier example

Deploy the Headers application

Configure the basic HTTPRoute

Send traffic to the Headers application

Update the HTTPRoute to modify the Response headers

Send traffic to the modified Headers application

Further reading